





Men's Trench Biker Jacket
-
Estimated Delivery:Jul 22 - Jul 26
-
Free Shipping & Returns: On all orders over 200£

Men's Trench Biker Jacket
Ventilation
Aqua defense panels on chest
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
SEEFLEX CE-level 2 Elbow Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Waterproofing
2L GORE-TEX fabric
By laminating the GORE-TEX membrane to the fabric, a 100% waterproof, windproof and highly breathable outer shell is created, offering unsurpassed durable wearer comfort.
Visibility
Laminated reflection at upper arms
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.
Insulation
Detachable thermal liner
Pockets
Inner napoleon pocket
Inner pocket within thermal liner
The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two waterproof inner pockets
Two waterproof stash pockets at waist
Sleeve pocket
Fit
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Features
Long connection zipper
The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Stretch at back
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
External hang loop
Whether carrying the jacket or hanging it out to dry after a wet ride, the sturdy external hang loop is a practical addition to the design.
V-flap at cuff
Adjustability
Adjustment strap at lower arm
Adjustment tab at waist
Flexisnap at collar
The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Adjustment tab at cuffs
Adjustment drawcord at hem
Outer shell
3D air mesh
This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.
2L nylon 600D GORE-TEX fabric
600 Denier-weight, nylon waterproof GORE-TEX fabric in a two-layered construction.
Protective Features
Soft spacer mesh protector pockets
In-between, mesh lining to assure positioning of protection components.
Shipping policy
7-10 Days Shipping All Over The World.
Safe & Reliable Shipping.
100% Trusted.
Refund policy
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at revikride@gmail.com. Please note that returns will need to be sent to the following address: address is not available right know check back later.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at revikride@gmail.com
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as washed, roughed, or used), custom products (such as special orders or personalized items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
European Union 14 day cooling off period
Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at revikride@gmail.com .